Project Showcase

  • Butterfly Dish
    by Don Reed

    Intarsia, I think. Butterfly for sure! Certainly will work for a covered dish for nuts or candy. Made with Walnut, Maple, Cherry and Lacewood.

  • TV Cabinet
    by Bill Van Ooyen

    Another happy Anthem homeowner loves the Woodchips. Filling the niche for the TV with a custom made cabinet featuring raised panel doors made from poplar and painted black. This project was lead by Bill Van Ooyen with the help of Dan Wenker.

  • Exhibition in Henderson Library
    by Eckhard Fadtke

    Woodchips member Eckhard Fadtke was invited to display some of his lathe art at the library.

  • Vase
    by Eckhard Fadtke

    Open segmented vase, maple and bubinga, 546 pieces.

  • Carafe
    by Eckhard Fadtke

    Purple hard and maple, modeled after old Greek pottery.

  • Humidor for Fine Cigars
    by Rick McIntyre

    Everyone should make one these. It is just a box, right? The box is made of mahogany and lined with Spanish Cedar for the cigars. The outside is trimmed with Cocobolo moulding at the base and maple splines at the corners. Inside, each cigar has an individual place and a battery powered...

  • Rocking Chair
    by Teo Oruc

    Rocking chair made of poplar..... as a prototype for a cherry heirloom piece.

    A spectacular piece of craftsmanship with hours of hand shaping required as well as accurate measurements and fitting.

    The next one will be even more outstanding.

  • Running Shoe Cutting Board
    by Gary Fox

    This cutting board is made for a tri-athlete as a wedding gift. The board is made from beech, maple, bubinga, and yellow heart and finished with mineral oil.

  • Vase
    by Scott Sturman

    Vase, I cannot describe.......it's big ART. Make from maple, cherry, wenge, probably some pine.

    It has about a jillion pieces, assembled in rings and turned.

    Nothing to it. Just ask Scot, he will show you how it's done.

  • Entertainment Center of Cherry
    by Bill Van Ooyen

    Custom designed entertainment center.

  • Rocking Horse
    by Richard Hollis

    These are some pictures of Rocking Horses made of Red Oak and Walnut. There have been some variations, but for the most part they are from the patterns developed by Rich and made by several members in classes conducted by Rich.

Welcome to Woodchips Woodworking Club

Some of the professional grade tools available for your use. Woodchips Club stresses safe operation of these tools through required training classes and supervised operations during open shop hours.

Safety while enjoying your hobby is everyone's goal.

Monday, April 6, 2015 - 10:30am
Instructor: Richard Gusikoff
Enrollment status: 10 of 12

The Annual Foreman Re-qualification Training will be held in four sessions this year. The dates are 3/31, 4/6. 4/13, and 4/20. The training will be conducted in a round table discussion format. Please bring pen and paper for note taking. Location: Penn Room Instructor: Richie Gustikoff Maximum enrollment: 12

Sign up on the website Calendar by enrolling yourself for the date you desire.

Monday, April 13, 2015 - 10:30am
Instructor: Richard Gusikoff
Enrollment status: 3 of 12

The Annual Foreman Re-qualification Training will be held in four sessions this year. The dates are 3/31, 4/6. 4/13, and 4/20. The training will be conducted in a round table discussion format. Please bring pen and paper for note taking. Location: Penn Room Instructor: Richie Gustikoff Maximum enrollment: 12

Sign up on the website Calendar by enrolling yourself for the date you desire.

Thursday, April 16, 2015 - 8:00am
Instructor: Richard Hollis
Enrollment status: Full

The End Grain Cutting Board Class

This class will be held on three consecutive days. You only need to Enroll for the first day of the Class.

Facilitator: Rich Hollis

Class size: 3

Prerequisites: Members attending must have completed, Shop Orientation, Clusters #4 (10” Jointer and 20” Planer), #5 (Sanders), #6 (Saws - Table saw and Compound Mitre Saw), and #8 (Router).

Materials needed:

Maple - 1 - ¾ x 30" Walnut - 1 - ¾ x 30" Cherry - 1 - ¾ x 30"

Members can register for Hammertime Classes by logging onto, scawoodchips.org and going to the Calendar. Sign up by clicking on the date that the class will be held. Registration will be enabled approximately two weeks prior to each classes scheduled class date.

Monday, April 20, 2015 - 10:30am
Instructor: Richard Gusikoff
Enrollment status: 1 of 12

The Annual Foreman Re-qualification Training will be held in four sessions this year. The dates are 3/31, 4/6. 4/13, and 4/20. The training will be conducted in a round table discussion format. Please bring pen and paper for note taking. Location: Penn Room Instructor: Richie Gustikoff Maximum enrollment: 12

Sign up on the website Calendar by enrolling yourself for the date you desire.